Disclaimer:
Thermalright or its
owners or partners is not responsible for damage or loss of any kind that may
occur as a result of using or misusing this or any product we manufacture. Use
common sense and review all product details prior to use.
Installation
- STEP 1-
- STEP 2-
Place the back plate onto the back of the motherboard.
Install the 1156 Bracket mount onto the motherboard.
- STEP 3 -
- STEP 4 -
Apply Thermal paste to the base of the cooler and on top of the CPU.
Place the mounting plate through the cooler and align the concaved area with the bulging point on the mounting plate
- STEP 5-
Secure the mounting plate by tightening the spring-loaded screws.
120mm Fan Installation
- STEP 1-
- STEP 2-
Apply the anti-vibration strips to each side of the heatsink.
Insert each end of fan wire clips into their designated fan holes on the heatsink.
- STEP 3-
Place a fan to the heatsink and pull on the wire clips to hook into the fan mounting holes.
140mm Fan Installation
- STEP 1-
- STEP 2-
Insert each end of fan wire clips into their designated fan holes on the heatsink.
Place a fan to the heatsink and pull on the wire clips to hook into the fan mounting holes.
